The design of Engineering tent fully implements the principle of structural mechanics, has good stability and practicability, and is deeply loved by users. At the same time, the construction of Engineering tent is also very simple and convenient. As long as the user knows the relevant technology and precautions before using, the construction of the tent can be completed quickly in a short time. However, it is not enough to rely on the outstanding advantages of Engineering tents to achieve good use effect. We must pay attention to and solve the following problems.

使用工程帳篷時應注意什麼

What should be paid attention to when using engineering tent

首先│↟▩，帳篷的位置問題

First of all, the location of tents

為了給人們提供一個舒適的休息場所│↟▩，工程帳篷的選址問題顯得尤為重要╃▩╃。因此,施工帳篷必須建立在一個區域開放和平坦的地形,不會保留雨水,以避免帳篷被水浸泡,不能保持乾燥,和這樣一個區域通常是泥土或沙子來滿足設定的要求╃▩╃。為了避免雨水的累積影響帳篷內休息環境的乾燥│↟▩，決定在露營結束後在帳篷周圍挖排水溝╃▩╃。

In order to provide people with the most comfortable resting place, the location of Engineering tent is particularly important. Therefore, the construction tent must be built in an open and flat terrain, without retaining rain water, to avoid the tent being soaked by water, unable to keep dry, and such an area is usually soil or sand to meet the setting requirements. In order to prevent the accumulation of rain from affecting the drying of the rest environment in the tent, it is decided to dig drainage ditches around the tent after the camping.

二是帳篷加固問題

Second, tent reinforcement

即使你使用的是高質量的工程帳篷│↟▩，在搭建的時候也不能掉以輕心╃▩╃。另外│↟▩，搭帳篷的過程需要嚴格按照步驟進行│↟▩，這樣才能保證帳篷的大牢固度╃▩╃。為了應對室外雷暴等惡劣天氣條件│↟▩，帳篷應採用拉繩固定在重物上│↟▩，同時加強釘釘│↟▩，有效防止帳篷被大風吹走╃▩╃。

Even if you use high-quality engineering tents, you can't build them lightly. In addition, the tent building process needs to be carried out in strict accordance with the steps, so as to ensure the maximum firmness of the tent. In order to deal with outdoor thunderstorm and other severe weather conditions, the tent shall be fixed on the heavy objects by the pull rope, and the nails shall be strengthened at the same time to effectively prevent the tent from being blown away by the strong wind.

Third, storage of tents

不得不說│↟▩，工程帳篷的存放問題也很重要│↟▩，甚至影響到下次使用的效果╃▩╃。因此│↟▩，消費者使用後│↟▩，不要直接把它放在角落裡│↟▩，而是要完成晾曬的工作後才能收集╃▩╃。在摺疊之前│↟▩，它還需要暴露在陽光下一段時間│↟▩，直到它變幹│↟▩，然後再收起來╃▩╃。如果不按要求儲存│↟▩，久而久之│↟▩，細菌就會生長並使帳篷變形而不能使用╃▩╃。

It has to be said that the storage of Engineering tents is also very important, even affecting the effect of next use. Therefore, consumers should not put it in the corner directly after using it, but should finish the work of drying before collecting it. Before folding, it needs to be exposed to the sun for some time until it dries out, and then it can be put away. If not stored as required, over time, bacteria will grow and deform the tent.

根據上面的介紹應注意的三個問題在使用過程中,良好的使用體驗的關鍵不僅是工程質量和耐久性的帳篷,而且選址的精心治療,強化和儲存的帳篷在使用過程中╃▩╃。解決這三個問題可以有效的保證帳篷的穩定性和舒適性│↟▩，更好的為人們提供舒適的休息環境╃▩╃。

According to the above three problems that should be noted in the use process, the key to a good use experience is not only the quality and durability of the tent, but also the careful treatment of site selection, strengthening and storage of the tent in the use process. To solve these three problems can effectively ensure the stability and comfort of the tent, and better provide people with a comfortable rest environment.