Effectively block the sunlight, reduce the indoor temperature, reduce the use frequency of empty items, and obtain economic benefits;

使用遮陽棚時可以開啟窗戶▩☁·，使室內空氣流通▩☁·，共同防止陽光直射損壞室內傢俱；

When using the sunshade, you can open the window to make the indoor air circulate and jointly prevent the direct sunlight from damaging the indoor furniture;

可以開拓戶外空間▩☁·，在陽臺或平臺上進行休閒☁•、鍛鍊▩☁·，不受紫外線和物質的陽光照射；

It can open up outdoor space, relax and exercise on the balcony or platform, without being exposed to ultraviolet rays and material sunlight;

為建築增添個性化裝飾▩☁·，裝飾家居▩☁·，使其更具藝術感和時尚感✘↟₪。

Add personalized decoration to the building, decorate the home, and make it more artistic and fashionable.

它不僅可以將強烈的陽光以漫射光的形式反射到室內▩☁·，還可以使室內光線明亮而不刺眼▩☁·，不影響從室內看到的窗外風景▩☁·，使人們的生活空間從室內延伸到室外▩☁·，從而創造出新的生活空間✘↟₪。天花板有兩種:手動天花板和電動天花板✘↟₪。我們來介紹一下手動遮陽篷和電動遮陽篷的區別✘↟₪。

It can not only reflect the strong sunlight into the room in the form of diffuse light, but also make the indoor light bright and not dazzling, without affecting the scenery outside the window seen from the inside, so that people's living space extends from the inside to the outside, thus creating a new living space. There are two kinds of ceilings: manual ceiling and electric ceiling. Let's introduce the difference between manual awning and electric awning.

手動遮陽篷:多為手動控制遮陽篷▩☁·，搖桿手動伸出收起✘↟₪。利用後圓管和前圓管的原理▩☁·，利用曲臂的拉力▩☁·，用手拉伸遮陽板▩☁·，達到遮陽擋雨的效果✘↟₪。

Manual sunshade: It is mostly used to manually control the sunshade, and the rocker is manually extended and retracted. Use the principle of the rear round tube and the front round tube, and use the pull of the curved arm to stretch the sunshade by hand to achieve the effect of sunshade and rain protection.

電控遮陽棚主要由電機驅動▩☁·，其他由鋁合金型材製成✘↟₪。原材料好▩☁·，對管狀電機要求高▩☁·，損壞率低▩☁·，使用壽命長▩☁·，質量穩定✘↟₪。

The electric sunshade is mainly driven by the motor, and the rest is made of aluminum alloy profiles. Good raw materials, high requirements for tubular motors, low damage rate, long service life and stable quality.

檢查低噪音迴轉風機及電機的執行狀態▩☁·，如果發現異常振動或噪音▩☁·，溫度不正常應及時停止並修復溫度▩☁·，以找出故障原因和相應的處理方法✘↟₪。

Check the operation status of low-noise rotary fan and motor. If abnormal vibration or noise is found and the temperature is abnormal, stop and repair the temperature in time to find out the cause of the fault and corresponding treatment methods.